Some machine maintenance today, it’s a job I’ve put off for far to long!
Adjusting the table saw’s sliding table.. over time the settings have moved ever so slightly, the sliding table is supposed to be set to have a very slight ‘toe out’ where the table moves fractionally away from the blade to prevent the back of the blade from binding on the workpiece. Mine had become a tad ‘toe’d in’ which made cross cutting wide boards frustrating.
The Hammer C3 31 is really easy to adjust (though the machines instructions have a lot to be desired) all it took was a spanner, a simple jig to hold a dial gauge and a bit of patience, now it’s spot on👌😃
Welcome to my blog!
Here you can see what I have been up to in the workshop, gain an insight into my work and some of the many tools I use to make each piece of bespoke furniture.